AUX-2 module for B750 MK II
New circuit board
Since many Revox B750 users now only operate one record player and prefer to use the second phono input as an additional high-level input, we have reproduced the AUX-2 board.
Anyone familiar with the circuit board knows there's not much to assemble! The circuit board only makes a few connections that would otherwise be made by the additional phono board.
As you can see here, the traces are particularly wide, 70 µm thick, and round! This may not be much of a difference compared to other layouts, but it's not a huge effort either. It has no negative effects, so it can only be a positive thing!
Installation
installation is very easy!
Loosen and remove the top cover plate using two rear screws. Now pull out the second phono card and replace it with the AUX-2 card. That's all. Put the lid on and screw it on, nothing more to do!
If it looks like this for you, everything's fine. You can't plug the AUX 2 board in incorrectly. There's no space to the right or left of the circuit board!
We also know that few amplifiers ship with a second phono input. However, if you have a second phono input, we want to give you the option to convert it to a line-level input.
This conversion isn't possible with the Revox B750 MK I! Both phono inputs run through only one phono amplifier!
new AUX-2-modules
for Revox B750 MK II can be found in our shop
