Accesories
Specially made by us
AUX-2 Revox B750 Turntable
New AUX-2 circuit board for all Revox B750s. Do you have a second phono input but need a line-level input? We have the solution!
Equalization boards Studer A80
New pluggable equalization PCBs for all Studer A80 tape machines. Naturally, they're manufactured in the high quality you've come to expect from Premium-Hifi. We haven't copied the less-than-perfect original PCB 1:1; we use the superior SMD technology here, too. The wiring is better, and there are no wired components that require hand-soldering. We at Premium-Hifi offer all equalization boards for recording and playback on the Studer A80 or B62, from 1.080.920 to 1.080.929 and 1.081.880 to 1.081.882.
Cassette compartment cover
For all Revox B710 MK I or MK II and Studer A710, high-quality. These covers are newly manufactured in-house. Due to the manufacturing process, minor defects may occur that are not visible when the cover is in place.
Pause 77
Since 2004 we have been manufacturing the pause circuit for all Revox B77 (MK I and MK II) and PR99 (MK I to MK III).
I was tired of having to hold down the pause button while the moderators were commenting!
Since 2014 we have been offering you the particularly convenient plug-in version.
ESV 77
We've been manufacturing the power-on delay for the Revox A77 tape machine since 2008. The new version is available with or without VU meter protection. Here, too, we've kept the circuitry as small as possible to save costs and increase acceptance through its simplicity. In the simple version (without VU meter protection), only five new connections need to be made, and that's it.
ESV 700
Our power-on delay is available for all Revox A700 devices without a factory-installed power-on delay. If the Revox A700 has a relay on the headphone amplifier, it already has a power-on delay.
Sintered bearing oil
Cleaning kit
Many avoidable recording and playback errors are caused by dirty tape heads. Therefore, we offer you the opportunity to clean the entire tape guide easily and thoroughly. For this purpose, we offer offset cleaning handles with rectangular felt pads and a special cleaning fluid.
Cleaning handle
To enable you to clean quickly and thoroughly, especially the heads of the Revox A77, we reproduce the handles of the original Revox cleaning sets. Only when everything is properly clean will you get the best possible recordings! Cotton swabs can't compete with that!
Specially made for us
Back part B77 dust cover
Excellently crafted back parts for the Revox B77 dust covers.
The frame fits perfectly between the upper front panel and the housing.
High-quality, sturdy plexiglass construction. Just like the original. Everything else is rubbish!
Power cable
2.50m long and with an angled plug (just like the original from Revox!)Suitable for all Revox devices with a two-pin connection, with an angled plug.
Since the original Revox power cables are no longer available, we had these 1:1 replicas made.
Accessories from well-known manufacturers
RTM
Reels
Since 2022, we at Premium-Hifi have been an official distribution partner of RTM, Recording the Masters. We can offer you LPR 35, LPR 90, SM 900, and SM911 as raw reels, on plastic reels, or metal reels.
We offer metal spools in red, blue, silver, gold, and black. The blue spools are manufactured exclusively for us. All spools are available with or without the tapes of your choice. We also source cardboard slipcases, spool flanges, spool cores, and the appropriate screws from France.
Recording The Masters
Tapes
The LPR 35 is the best tape for the Revox A77, B77, A700, and PR99! Studio tapes like the SM 468, SM 911, or SM 900 are also suitable for tape machines with controlled tape tension. The LPR 90 tape is relatively new. This tape is said to have the same specifications as the SM 900 studio tape but is only 35 µm thick, making it a perfect fit for the Revox A77, B77, PR99, and A700!
