Distance extension

A tiresome topic! 

The sockets on many Revox devices are far too narrow and only the old Revox cables will actually fit. Then there are the cheap metal sockets and plugs that were used in the past! These often make no or poor contact and the contact resistance is far too high! We don't believe in cable voodoo, but this can have a negative and audible effect on the sound.

You want to use high-quality cinch cables with equally high-quality cinch plugs and then realise that the cables cannot be connected to many Revox devices. At 11 mm, the distance between the RCA sockets is far too small and you still have the sometimes heavily oxidised metal sockets!

Only we offer high-quality gold-plated RCA sockets with a spacing of 15 mm. This means you can use all cinch cables available on the market and don't have to make any compromises.

We only use high-quality, hard gold-plated RCA sockets. The new RCA sockets with 15 mm spacing and the original Revox RCA sockets with only 11 mm spacing. 

With a 15 mm gap between the RCA sockets, even the really good plugs will fit.

On the left are the Neutrik (revox-compatible) plugs, on the right are the high-quality Neutrik RCA plugs. 

These and similar RCA plugs from WBT and Co. only fit with us!

with new cinch sockets.

Here, too, you have to file. We only offer our extension with black solder resist. 

You will receive screws and nuts for fastening. 

With the original Revox RCA sockets, metal sheets were used as an earthing surface. With us, you always have the full shielding effect.

You can create the desired connection between the circuit boards using simple solder bridges!

If you make this effort - you don't have to be afraid of filing. It takes a lot of work to get it looking like this!

We also offer the high-quality cinch sockets for sale without a circuit board.